NECA

$20.00
Recommended Practice for Commissioning Building Electrical Systems National Electrical Contractors Assocation / 2009 / 28 pages Describes procedures for commissioning newly installed or retrofitted building electrical systems. It defines the process of commissioning building electrical systems and provides sample guidelines for attaining optimum system performances that conform to design, specifications, and industry-accepted codes and standards. NECA 90 is approved as an American National...
$20.00
Recommended Practice for Installing Underground Nonmetallic Utility Duct (ANSI) National Electrical Contractors Assocation / 2010 / 34 pages Describes the application procedures for selecting and adjusting low-voltage overcurrent protective devices to achieve selective coordination. NECA 700 is approved as an American National Standard (ANS).
$20.00
Telecommunications Bonding and Grounding Planning and Installation Methods for Commercial Buildings National Electrical Contractors Assocation / 2011 / 34 pages This American National Standard specifies aspects of planning and installation of telecommunications bonding and grounding systems within a commercial building. This standard is intended to enhance the planning, specification and layout of an effective telecommunications bonding and grounding system. Additionally, this standard...
$20.00
Recommended Practice for Installing Underground Nonmetallic Utility Duct (ANSI) National Electrical Contractors Assocation / 2005 / 46 pages Describes the installation, shipping, and handling of underground single bore nonmetallic duct for power, lighting, signaling, and communications applications. Developed jointly with the National Electrical Manufacturers Association, NECA/NEMA 605 is approved as an American National Standard (ANS).
$20.00
Recommended Practice for Installing and Maintaining Medium-Voltage Cable (ANSI) National Electrical Contractors Assocation / 2010 / 42 pages Describes installation procedures for shielded and non-shielded solid dielectric medium-voltage cables rated from 600 volts to 69,000 volts AC and installed in conduits, ducts, or direct buried. This publication applies to single and multi-conductor cables used for distributing power for commercial, institutional, and industrial load in nonhazardous...
$20.00
Standard for Installing and Maintaining High Mast, Roadway and Area Lighting National Electrical Contractors Assocation / 2010 / 26 pages This standard describes the installation and maintenance procedures for high mast, roadway, area, and sport lighting systems installed outdoors for commercial, institutional, and industrial applications. This Standard applies to high intensity discharge lighting luminaires rated 600 Volts and less and mounted on poles. This Standard does not apply to...
$20.00
Standard for Installing Fiber Optic Lighting Systems National Electrical Contractors Assocation / 2005 / 28 pages 1627230Describes installation procedures for installing glass fiber optics lighting systems.
$20.00
Standard for Installing Industrial Lighting Sytems (ANSI) National Electrical Contractors Assocation / 2006 / 30 pages This standard describes installation procedures for installing industrial lighting systems. NECA/IESNA 502 is approved as an American National Standard (ANS).
$20.00
Standard for Installing Exterior Lighting Systems (ANSI) National Electrical Contractors Assocation / 2006 / 30 pages Describes installation procedures for installing exterior lighting systems. NECA/IESNA 501 is approved as an American National Standard (ANS).
$20.00
Standard for Installing Indoor Lighting Systems (ANSI) National Electrical Contractors Assocation / 2006 / 46 pages Describes installation procedures for indoor-commercial lighting systems, including fluorescent and HID luminaires. Developed jointly with the Illuminating Engineering Society of North American. NECA/IESNA 500 is approved as an American National Standard (ANS).
$20.00
Standard for Installing Medium-Voltage Metal-Clad Switchgear National Electrical Contractors Assocation / 2006 / 50 pages Describes installation of medium-voltage metal-clad switchgear. NECA 430 is approved as an American National Standard (ANS).
$20.00
Standard for Fuse Applications National Electrical Contractors Assocation / 2007 / 34 pages This standard describes application and installation practices and procedures for low-voltage, medium-voltage, and high-voltage fuses. This publication applies to all classifications of fuses used for overcurrent protection of distribution, utilization, and control equipment used for power, heating, and lighting loads for commercial, institutional, and industrial use in nonhazardous indoor and outdoor...
$20.00
Installing and Maintaining Photovoltaic (PV) Power Systems National Electrical Contractors Assocation / 2012 / 62 pages The standard describes the application procedures for installing photovoltaic power systems and components. It covers the installation of low-voltage AC and DC photovoltaic power systems, rated 1000V and less, for grid-connected and stand-alone operation for residential, commercial, and industrial applications.
$20.00
Standard for Installing and Maintaining Uninterruptible Power Supplies (UPS) National Electrical Contractors Assocation / 2006 / 24 pages Describes installation and maintenance procedures for permanently installed, static, three-phase Uniterruptible Power Supplies (UPS) rated 30 kVA or more and rated 600 volts or less and related battery systems installed indoors and outdoors for commercial, institutional, and industrial applications. NECA 411 is approved as an American National Standard...
$20.00
Standard for Installing and Maintaining Liquid-Filled Transformers National Electrical Contractors Assocation / 2005 / 46 pages Describes installation and maintenance procedures for liquid-filled transformers. NECA 410 is approved as an American National Standard (ANS).
$20.00
Standard for Installing and Maintaining Dry-Type Transformers National Electrical Contractors Assocation / 2009 / 42 pages Describes installation and maintenance practices for dry-type, two-winding transformers used for supplying power, heating, and lighting loads for commercial, institutional, and industrial use in nonhazardous locations, both indoors and outdoors. NECA 409 is approved as an American National Standard (ANS).
$20.00
Recommended Practice for Installing and Maintaining Busways National Electrical Contractors Assocation / 2009 / 34 pages Describes installation procedures for feeder and plug-in busways and associated accessories rated 600 volts AC or less and 100 amperes or more. It also covers periodic routine maintenance procedures for busways and special procedures used after adverse operating conditions, such as a short-circuit, ground-fault, or immersion in water. NECA 408 is approved as an American...
$20.00
Recommended Practice for Installing and Maintaining Panelboards National Electrical Contractors Assocation / 2009 / 26 pages Describes the installation procedures for panelboards rated 600 volts AC or less, with main disconnects or lugs rated 1600 amperes or less and with feeder or branch circuit overcurrent devices rated 1200 amperes or less. It also covers periodic routine maintenance and troubleshooting procedures to be used after adverse operating conditions such as a short-circuit,...
$20.00
Standard for Installing Residential Generator Sets National Electrical Contractors Assocation / 2003 / 30 pages Describes installation procedures for (a) Generator sets permanently installed at one-family dwellings to provide backup power, typically rated 120/240 volts, single-phase, three-wire; and (b) Generator sets fueled by gasoline, natural gas, or liquified petroleum (LP) gas. NECA 406 is approved as an American National Standard (ANS).
$20.00
Standard for Installing Generator Sets National Electrical Contractors Assocation / 2007 / 14 pages Describes installation procedures for generator sets used for on-site power production, including emergency applications. Developed jointly with the Electrical Generating Systems Association. NECA/EGSA 404 is approved as an American National Standard (ANS).