SCTE

Society of Cable Telecommunication Engineers: SCTE standards cover a wide range of industry needs --- from F connectors to protocols for high-speed data access over cable. SCTE is accredited by the American National Standards Institute (ANSI), recognized by the International Telecommunication Union (ITU), and works in cooperation with the European Telecommunications Standards Institute (ETSI).
$25.00
Carriage of Vertical Blanking Interval (VBI) Data in North American Digital Television Bitstreams Society of Cable Telecommunication Engineers / 01-Jan-2007
$25.00
DOCSIS 3.0 Part 4: Operations Support Systems Interface Society of Cable Telecommunication Engineers / 01-Jan-2007 This specification is part of the DOCSIS® family of specifications. In particular, this specification is part of a series of specifications that define the third generation of high-speed data-over-cable systems. This specification was developed for the benefit of the cable industry, and includes contributions by operators and vendors from North America, Europe, and other...
$25.00
IPCablecom 1.5 Part 15: Management Event MIB Specification Society of Cable Telecommunication Engineers / 01-Jan-2009 / 21 pages The Management Event MIB provides a common data and format definition for events (informative, alarm, etc.). It also specifies by what means events are transmitted. Use of a common event mechanism facilitates management of the MTA in a multi-vendor environment and provides a standard means to implement IPCablecom specified events.
$25.00
Recommended Practice for Transport Stream Verification in an IP Transport Network Society of Cable Telecommunication Engineers / 01-Mar-2010 / 21 pages This Recommended Practice is to give guidance about detecting errors in the IP Transport network used for the delivery of media services including Video and Audio streams of data with the associated control information to provide MPEG transport through an IP network. The IP Transport Layer operates in conjunction with other Application and...
$25.00
Recommended Practice for Monitoring Multimedia Distribution Quality Society of Cable Telecommunication Engineers / 01-Mar-2010 / 35 pages The scope of this Recommended Practice document is to provide background and discussion on Multimedia Management (MMM) system requirements to assist the cable operator with MMM deployment design tradeoffs as well as provide guidance and recommendations on several topics related to the deployment of Multimedia Management systems based on the experiences to...
$25.00
Test Method for Axial Load Temperature Cycling, (formerly IPS TP 404) Society of Cable Telecommunication Engineers / 01-Jan-2002 / 6 pages This test procedure is intended to evaluate the connection between the connector and the coaxial drop cable when it is subjected to a continuously varying environmental cycle. The cable/connector assembly has an axial load of 15 pounds applied to them during the environmental cycling.
$25.00
IPCablecom Embedded MTA Primary Line Support, (formerly DSS 02-11) Society of Cable Telecommunication Engineers / 01-Jan-2002 / 29 pages This standard defines the embedded MTA (E-MTA) requirements necessary to support primary line communications service. An embedded MTA is a Cable Modem (CM) integrated with an IPCablecom Media Terminal Adapter (MTA). In the context of this standard, designation of a communications service as "primary" means that the service is sufficiently reliable...
$25.00
Test Method for AC to DC Power Supplies, (formerly IPS TP 209) Society of Cable Telecommunication Engineers / 01-Jan-2002 / 20 pages To characterize, document and define test methods for AC to DC power supplies. These tests involve the measurement of AC input parameters and DC output parameters. The application of uniform test methods for power supplies will allow fair performance comparisons to be made between different power supplies. There are repetitive tests throughout this test...
$25.00
Hum Modulation, (formerly IPS TP 204) Society of Cable Telecommunication Engineers / 01-Jan-2001 / 21 pages To define and measure hum modulation in active and passive broadband telecommunications equipment. This procedure presents two methods for measuring hum modulation in the time domain, with a sensitivity exceeding -80 dB. These methods are referred to as the 1 dB delta and the differential voltage method. A mathematical relationship between time domain and frequency domain measurement...
$25.00
IPCablecom CMS Subscriber Provisioning Specification, (formerly DSS 02-18) Society of Cable Telecommunication Engineers / 01-Jan-2004 / 52 pages IPCablecom 1.0 service provisioning can be viewed as two distinct operations: Multimedia Terminal Adapter (MTA) provisioning and Call Management Server (CMS) subscriber provisioning. This Recommendation defines the interface used between the CMS and Provisioning Server for the exchange of service provisioning information. The interface employs a Web...
$25.00
Test Method for Aerial Cable Corrosion Protection Flow, (formerly IPS TP 014) Society of Cable Telecommunication Engineers / 01-Jan-2001 / 5 pages This test is to determine that moisture blocking material used in cables intended for indoor and aerial applications, does not flow or drip out of the cable.
$25.00
Specification for Trunk, Feeder and Distribution Coaxial, (formerly IPS SP 100) Society of Cable Telecommunication Engineers / 01-Jan-2001 / 18 pages This specification applies to general purpose Trunk, Feeder and Distribution Coaxial Cables. Currently there are two distinctive designs of dielectric available, this document will cover both designs. These are 1 - Gas injected foam dielectric and 2 - Disc and air dielectric. Specialty cables will not be included in this document. References to...
$25.00
Requirements for Preferential Telecommunications over IPCablecom Networks Society of Cable Telecommunication Engineers / 01-Jan-1997 / 9 pages The objective of this Standard is to provide an initial set of requirements for preferential telecommunications within IPCablecom networks. Aspects of preferential telecommunications include provisions for Authentication and Priority (Special Handling). These requirements do not apply to ordinary emergency calls such as people calling police, fire...
$25.00
DOCSIS 1.1 Part 1: Radio Frequency Interface, (formerly DSS 02-09) Society of Cable Telecommunication Engineers / 01-Jan-2002 / 418 pages This document defines the radio-frequency interface specifications for high-speed data-over-cable systems. They were developed for the benefit of the cable industry, including contributions by operators and vendors from North America, Europe, and other regions. There are differences in the cable spectrum planning practices adopted for different networks in...
$25.00
Standard Methods for Isochronous Data Services Transport, (formerly DVS 132) Society of Cable Telecommunication Engineers / 01-Jan-2001 / 12 pages This proposal represents transmission format for the carriage of isochronous data services compatible with digital multiplex bitstreams constructed in accordance with ISO/IEC 13818-1 (MPEG-2 Systems). Bit rates for the data services extend from 19.2 kbps to 9.0 Mbps.
$25.00
Method for Carriage of Closed Captions and Non-Real Time Sampled Video Society of Cable Telecommunication Engineers / 01-Jan-2001 / 17 pages This document defines a standard for the carriage of Vertical Blanking Interval (VBI) services in MPEG-2 compliant bitstreams constructed in accordance with ISO/IEC 13818-2.
$25.00
Radio Frequency over Glass Fiber-to-the-Home Specification Society of Cable Telecommunication Engineers / 01-Dec-2010 / 34 pages This document defines a fiber-to-the-home system optimized for compatibility with hybrid fiber-coax (HFC) plant, using the same end equipment at both the home and at the headend or hub. The RFoG system is defined to begin where the plant becomes passive, extending from that point to the home. This interface is referred to as the Optical Hub. There are many possible...
$25.00
DOCSIS 3.0 Part 4: Operations Support Systems Interface Society of Cable Telecommunication Engineers / 01-Jan-2008 / 826 pages The purpose of this standard is to define the management requirements for the architecture of the third generation of DOCSIS including key management categories of Fault, Configuration, Accounting, Performance and Security.
$25.00
Data Encryption Standard - Cipher Block Chaining Packet Encryption Specification Society of Cable Telecommunication Engineers / 01-Jan-2008 This document defines a method for encrypting MPEG-2 transport stream packets using the Data Encryption Standard (DES) Cipher Block Chaining (CBC) encryption standard.
$25.00
Graphic Symbols For Cable Systems Part 1: HFC Symbols Society of Cable Telecommunication Engineers / 01-Jan-2008 / 17 pages The symbols for devices do not indicate types or model numbers of any manufacturer. They represent the function of the device operated within a cable system. The symbols permit easy addition of model or type numbers within or near their outline. If such model or type designations are used, an explanation of these designations should be placed on a legend sheet for the...